Marine Systems Technology, Inc.
Box 1507, North Falmouth, MA 02556
508-548-0012 (voice) 508-548-8806 (fax)
email: mast@marinesystems.com


Inverted Echo Sounder


Introduction

The model 1050 Smart Inverted Echo Sounder (SmartIES) Inverted 
Echo Sounder (IES) is an integrated system designed for long term
submergence in the deep ocean, consisting of the following sub-systems: - acoustic transponder, - acoustic command receiver, - burn wire release mechanism, - range gated inverted echo-sounder, - High accuracy pressure sensor, - PC-104 based data logger - Battery System Description The mechanical design of the SmartIES integrates the acoustics
and control electronics onto a single board as shown in the layout
photographs. In addition, a custom battery pack that contains the
batteries for the transponder and the IES electronics SmartIES Electronics The SmartIES electronics are packaged on a single P.C. Board,
mounted on an aluminum plate positioned over the battery pack and
optional pressure transducer. This board contains: Interface to the user is made by way of a 4 pin Brantner SeaCon connector
mounted on the sphere, and accessible via two holes in the hardhat assembly.
IES Specifications
Pre-Ping Frequency 12.126 Khz
Ping Frequency 10.017 Khz
Source Level 193 db ref 1 upa
Transponder Min Det Signal 80 db ref 1 upa
IES Min Det Signal 70 db 1 upa
Range 0.5-30 sec travel time (375-22,500 m)
Resolution 8.680556 usec
Jitter +/- 100 usec
Lockout 10 ms to 7.66 sec, 30 ms increments
Sample Interval 30 min to 6 hour, 30 min increments
Pings/Sample 1 to 64
Ping Rate 4 sec to 30 sec
Returns/Ping 1 to 4
Life 1 Yr., plus 350,000 Pings
Data Capacity 10 Megabyte PCMCIA Flash Card (Formated capacity: 9,667,075
Air weight 95 Pounds (43 Kg)
Bouyancy 10 Pounds (4.5 Kg)
Pressure sensor range 0-10,000 PSI
Pressure sensor accuracy 0.01%
With optional pressure transducer